The Toyota C-HR is considered a subcompact crossover SUV marketed under the Toyota brand. This model debuted in 2016 by Toyota chief engineer name Hiroyuki Koba. The C-HR in its name means for Couple High-Rider, Cross-hatch Run, or Compact High Rider.
It’s Bolt SUV design also offers a nicely outfitted cabin with funky exterior looks. Along with that, it delivers High fuel economy, touchscreen infotainment, and driver system features.
With such advanced features, Toyota C-HR also engineered with its dashboard that will display the lights of any alert or maintenance whenever your car needs them. Basically, three color lights are displayed on the Toyota C-HR Dashboard: Red, Green and yellow in which red detects warning alerts, yellow detect maintenance and green detects the activation of any utility system.
This guide will let you know about all the dashboard warning lights, their meanings, along with the procedure that you must implement when these lights blink on your dashboard. You can also refer to the other Toyota model on our site, which includes Toyota Corolla, Toyota Yaris, and Toyota Camry.
This dashboard warning light flickers on your Toyota C-HR instrumental cluster to alert you that the fluid quantity in the brake system of your vehicle is insufficient. So, it becomes tougher when you apply the brake pedals. In this situation, check your C-HR at Toyota service station.
This dashboard light flickers on your Toyota C-HR instrumental cluster whenever the oil pressure in getting insufficient in your car. Due to this low level, the oil flows so improperly throughout the engine. In this case, we highly advised you to inspect your car by Toyota C-HR service dealer.
This warning symbol activates on your Toyota C-HR which indicates you about the technical fault occuring in the airbag system. The few reasons behind this problem are may be the hit, crash or airbags sensors are not working well as they will not blow up when they needed. So, in this case you should once check your car at Toyota service centre.
This dashboard light blinks on your instrumental cluster to indicate you that the engine of your Toyota C-HR is getting overheated. At this moment, immediately turn off your engine and put it in Neutral mode. So that the engine temperature goes down. If this light is still flickering even after you turn off your engine then you must inspect your car at Toyota service centre.
This dashboard light flickers on your Toyota C-HR dashboard to indicate you that there is a technical fault in the battery or in the charging system of your car. May be there is a chance that your battery is discharging or overflowing. So in this case, you must once check your vehicle at Toyota service centre.
This Dashboard warning light comes on your Toyota C-HR dashboard to indicates you that you have somehow applied the parking brakes and they are not released properly. At this case, immediately lose the parking brakes of your vehicle to turn off this warning light. If this light is still flickers then inspect your vehicle at the Toyota Service centre.
This warning light blinks on your Toyota C-HR Dashboard to alert you that the seat belts in your vehicle is not properly buckled and fixed. Do check your seat belts and makes it adequately tight.
This warning light get flickers on your Toyota C-HR dashboard to alert you that there is an electrical problem in your car’s engine. The few conditions behind this light can be fuel intake, losing of gas cap etc. In this case, you should inspect your C-HR at Toyota service centre.
This dashboard warning light blinks on your Toyota C-HR cluster to indicate you that the fuel level in the fuel tank of your vehicle is insufficient. In this situation, ensure that the fuel level in your car should be in sufficient quantity.
The Warning light illuminates to alert you about a technical problem in the Anti lock braking System of your car. At this particular moment, when you are getting problem in ABS, you can use conventional parking brakes but later you do check your C-HR at Toyota service centre.
This Dashboard warning symbol flickers on your Toyota C-HR instrumental cluster to indicate that there is a technical problem occurs in power steering system as now it starts sliding in one direction that creates severe risk to your safety. So you must rush to the garage to get service your Toyota C-HR.
This stability control indicator blinks on your Toyota C-HR dashboard to indicate you that this electronic stability control system is activated in your vehicle. When this system is on in your car, it will assist you by controlling the stability of the wheels and also provide you road grips.
This dashboard light blinks to indicate to you that the stability control system is turns off in your Toyota C-HR. Now these sensors are no longer assist you in controlling the wheels for road grip and will not provide stability to your car.
This Dashboard warning light illuminates in your C-HR to indicate you that the tire pressure is getting insufficient in your car.
Do not avoid this Dashboard light as it will later lead to tire punctures. So immediately check your car at the Toyota C-HR service station.
The Front Fog lamps symbol flickers on your Toyota C-HR dashboard to indicate that the front fog lamps of your car is now turn on.
This Lamps On Dashboard Indicator activates on your Toyota C-HR instrumental cluster to display you that the head lamps are on in your vehicle.
This Dashboard light flickers on your Toyota C-HR to indicate you that the cruise control system is now activated in your vehicle and set a desired speed for your car mostly in rush or in traffic situations.
This direction Indicator sign assist you in left and right direction while driving. These are actually direction assist sensors which helps you when you turn your car in different directions.
This dashboard light flickers on your Toyota C-HR dashboard to let you inform that the high beams lights are engaged/activate in your vehicle.