Toyota Sienna Dashboard Lights And Meaning

Toyota Sienna ABS dash warning light Implies a malfunction in the ABS or the brake assist system. If you cannot find the reason for the warning, that may affect the system functioning, and maybe an accident occurs. Take your minivan for inspection to your Toyota service center instantly.

The Automatic High Beams system infers a camera sensor to evaluate the oncoming and preceding automobiles lights. It automatically switches the high beams on or off as needed. The Automatic High Beams warning sign will appear on the console when the Toyota Sienna headlights are automatically turned on to specify the active system.

When the sign blinks on the dashboard, the system has been overfilled, and Front-Wheel Drive has been automatically triggered. When the signal goes on, there's a failure in the AWD system. Firstly, to avoid the fault, drop the speed or don't drive until the warning light stops twinkling. If again the light blinks, take your Toyota Sienna for servicing.

Toyota Sienna Brake system warning light goes on when a car has low brake fluid and malfunction in the brake system. This sign also lights up when the parking brake is not fully released. If the Toyota warning light on the instrument cluster remains on, stop the minivan immediately and contact your service provider for repair.

If this warning light comes on, it means Toyota Sienna's battery is not fully charged or maybe a malfunction in the charging system. The warning implies the chance of damage that may be the reason for an accident. Instantly stop the car in a safe place and contact your Toyota maintenance and repair for assistance.

If the Toyota Sienna dashboard indicator is on, it means cruise control is active. You can use the cruise control to stable a speed without pressing the accelerator. Push the ON-OFF button to start cruise control, and to deactivate, press the button again. If a cruise control warning light appears, that means a fault in the cruise control system. Take your car for repair to Toyota service station.

Toyota Sienna driver seat-belt reminder light on the dashboard warns the driver to buckle his/her seatbelt. It helps to alert the driver and front passenger that they don't fasten their seatbelts properly. After wearing the seat belt, check that the warning light goes off.

The ECO Driving Indicator will be active during eco-friendly driving.

If the Electric Power Steering (EPS) system warning light on the dashboard appears, it means a malfunction in the EPS system. It's tough to change the steering direction. Take your Toyota Sienna to the service station for aid.

The headlight indicator on the instrument panel brightens when the headlights, parking, tail-lights switch on. It doesn't glow when the Daytime Running Lights are active.

Low engine oil pressure warning light demonstrates that the engine oil pressure is too low. Refill the engine oil first, then continue your drive.

Low fuel level warning light suggests to the driver that the remaining fuel is too less. Firstly, refuel your minivan to proceed with your traveling.

The low windshield washer fluid level warning sign on the instrument cluster implies that the windshield washer fluid level is too low. Load the washer tank of your Toyota Sienna with fluid.

Maintenance required reminder light reminds the driver that maintenance is needed. It goes on and stays on if the distance covered more than 5000 miles. To switch off this warning light, accomplish the mandatory maintenance, and reset the maintenance data after it is completed.

Toyota Sienna Malfunction indicator lamp on the console signifies a malfunction in the electronic engine control system, electronic throttle control system, and electronic automatic transaxle control system. To repair it, go to your minivan's service station.

A Master warning sign pops up and flickers to signify that the master warning system has found a malfunction.

Toyota Sienna open door warning light tells the driver that your car door is not fully closed. To avoid this warning light, check that all doors are shut appropriately.

If the Toyota Sienna is at threat of sliding or any car's wheels spin, the slip indicator warning light flickers signifies that the TRAC systems are functioning.

When the dashboard warning light turns on, it means tire inflation pressure is low. Add the tire pressure to the determined level, and if the lamp doesn't turn off even after adjusting the tire inflation pressure, that implies an issue in TPMS. Take your Toyota Sienna for repair.

If the blind spot monitor is on, the dashboard sign's indicator lights up, and then with the help of radar sensors, it will instruct the driver about vehicles that are not noticed by the rearview mirror or the blind spot.