Jeep Wrangler is compactly designed to give you the best experience of off-road adventures with a driving dynamics comfort.
Such luxurious and branded cars use many warning lights featured on the dashboard, indicating malfunctioning, immediate security, and maintenance issues.
It is highly recommended not to ignore these warning lights present on the Jeep's dashboard, whether it flashes red, yellow, or green signals. It might be a risk to driver safety or vehicle damage.
Look out the catalog below that we designed to demonstrate how to deal with airbag warning signs, engine lights, seat belt reminder signs, ABS lights, and other warning signs.
This warning light activates when the parking brake is engaged, low level of brake fluid & maybe there is a problem that occurs with the braking system. Please check your parking brakes & if it stays on, then a quick service check is required.
This warning light turns on when a problem occurs in the battery charging system or the battery is not charging appropriately.
This Indicator active when at the same time, the accelerator and brake pedal is kept pressed.
This Indicator active when there is low engine oil pressure. So, immediately stop the vehicle and shut off the engine.
This Indicator turns on when there is a high transmission fluid temperature. If this light turns on, stop the car and run the engine at idle or slightly fast, with the transmission in PARK (P) or NEUTRAL (N), until the light becomes off. Once the light becomes off, you may continue to drive normally.
This Indicator turns on when the fluid level of coolant or the engine gets overheated. So, immediately stop the vehicle turn off the machine, and let everything cool down.
The Security Indicator Light lights up to indicate that the security system is either running appropriately or indicating a security system's fault.
This warning light turns on whenever a fault with the airbag has been detected. If it stays on while driving or start-up, then immediately contact an authorized dealer.
This Indicator flashes or stays on until the driver's seatbelt is not correctly hooked.
This warning light activates when the doors remain open or not properly closed.
This Indicator indicates when a defect occurs in the engine. The conditions that can be responsible are low-quality fuel, gas cap, etc. It is a severe alert that needs immediate service.
This Indicator indicates when Cruise control is not functioning correctly, and it requires immediate service.
This light illuminates to warn the driver that there is not much fuel remaining in your vehicle's tank. Try to find a gas station as soon as possible if this light illuminates while driving.
If this light gets turn on during driving, then there is a fault with the 4WD system that should be properly diagnosed and repaired.
This Indicator gets on when the anti braking System doesn't function well, and it needs immediate service.
This Indicator gets turned on when there is a problem that occurs in the electric power steering system.
This light indicates the electronic stability control system is turned off. Whenever you start your vehicle, the ESC system will turn on even if you switched it Off previously.
This light gets on to alert the driver that the electronic stability control system is engaged in your vehicle. If this light stays on for a long time and your vehicle drive at a speed greater than 48 kilometers per hour, then get check your vehicle by an authorized dealer.
This light begins when the tire pressure gets low in the vehicle.
This Indicator indicates that front fog lights are turned on.
This Indicator activates when high beams lights get turn on. Pull the multifunction lever in a rearward direction to turn off the beams, or pull the lever towards you to turns on high beams.
This Indicator starts when headlights get turn on.
This light gets turn on when the start-stop function is on Autostop mode.