Mercedes-Benz B Class Dashboard Lights And Meaning

ABS is responsible for preventing wheels from locking during emergency braking. If the yellow ABS warning light is on while the engine is running, the ABS is not working properly. If there is an additional warning tone, the Electronic Brake Force Distribution does not function properly. EBD applies varied brake pressure to the individual wheels to help improve braking performance. You can continue driving, but avoid hard braking if possible and have your vehicle checked as soon as possible.

Under normal operating conditions, the Alfa Romeo Giulia airbag warning light will come ON/RUN status as a standard bulb with the ignition on for between 4 and 8 seconds. If this indicator light turns on or blinks during engine ignition or while driving or when an audible chime is heard, there is a malfunction in the airbag system. Check your vehicle as soon as possible.

Mercedes-Benz B Class\'s dipped headlight symbol indicates that dipped light is on. It is basically used at nights. Pull the lever towards you for a temporary high beam, \"Flash to pass\" scenario.

Electronic Stability Program (ESP) is a combination of vehicle stability systems that help maintain safety and stability. There are specific modes available that limit the amount of ESP involved, or there is an option to disable it. ESP is activated by default every time the vehicle is started.

The electronic Stability Program (ESP) has been switched off or automatically deactivated. It is usually safer to keep ESP switched on at all times, however, if your vehicle becomes stuck in snow or dirt, turning off ESP/traction control can prove useful for getting the car unstuck.

The yellow check engine warning light illuminates to indicate a malfunction in the engine, exhaust system, or fuel system. In this situation, the engine can enter emergency mode. Emergency mode is a safety system that overrides regular use to reduce engine power. It helps reduce the chances of failure. Engine check light turns on due to engine management, fuel injection system, exhaust system, ignition system, and fuel system. You can generally continue driving, but have the vehicle checked as soon as possible. Diagnostic equipment is required to read fault codes.

This symbol represents the front fog lights of Mercedes-Benz B Class being switched on.

The brake warning light is also shown as the Mercedes-Benz B-Class brake warning light symbol depending on your country. The brake warning light indicates that the increase in braking force is not working correctly, and the braking characteristics may be affected, or there is not enough brake fluid in the brake fluid reservoir.

Mercedes-Benz B Class \'s high beam/main beam headlight symbol indicates that high beam headlights are on.

This symbol represents the rear fog lights of Mercedes-Beanz B Class being switched on.

The yellow tire pressure monitoring system (TPMS) warning light illuminates, indicating the loss of pressure detected in at least one of the tires. Pull off the road carefully and avoid sudden braking or steering movements. Stop the car and check the tire pressure or replace the wheel with a spare one.

The seat belt warning light with an audible buzzer will alert vehicle passengers to fasten their seat belts, along with the ignition key for the ON / RUN position. If a driver or passenger in the vehicle does not tighten the seat belt, the light will begin to flash and a chime will sound. Fasten your seat belt for safety reasons as it will protect you.

This Mercedes-Benz B Class dashboard warning light informs the driver that the exterior lights/sidelights/parking lights/headlights are switched on.

The turn indicator symbols represent the indicator is switched on of Mercedes-Benz B Class.