Chrysler Pacifica Hybrid Dashboard Warning Lights And Meanings

This dashboard warning sign will turn on when assistance to the hybrid electric system is required. It will be supported by a Hybrid Electric Vehicle System message in the cluster. If the light continually remains on, contact the Chrysler Pacifica Hybrid dealer shortly.

This warning sign will switch on when you adjust the desired speed to control your Chrysler Pacifica Hybrid.

This dashboard warning symbol implies having sufficient energy to drive the Chrysler Pacifica Hybrid nevertheless of the car's speed.

This warning sign will trigger when the service LaneSense system is not working and demands the service. Reach to the nearby Chrysler Pacifica Hybrid dealer for support.

This symbol will activate to reflect the electronic parking brake is not working appropriately, and keep in touch with Chrysler Pacifica Hybrid dealer for service.

This pointer light will brighten when a plug status fault is found or when your minivan is not in movement. It will be shown a cluster message revealing the types of failures. You may found some cluster messages if a fault is detected: ● Service Charging System ● Issue Detected Check External Charging Pin

This warning signal will switch on when the Chrysler Pacifica Hybrid liftgate is open or unlocked.

This dashboard lamp reflects low engine oil pressure; if the light goes on while driving, stop the Chrysler Pacifica Hybrid switch off quickly. Do not regulate the minivan until the problem is rectified. This light does not reflect the amount of oil in the car.

This turn indicator signifies that the left or right direction light is active. The symbol lamp usually shines brightly from time to time. It can be triggered when the Chrysler Pacific Hybrid's lever is moved down / left or up / right.

This telltale will activate when there's a defect with the Electric Power Steering system.

This telltale will light up when an overheated engine condition occurs. If the car coolant temperature is too high, this pointer will fill with light. If the temperature approaches the higher boundary, a continuous sound will beep for four minutes. Suppose the flash goes on while driving, safely takes aside the hybrid minivan, and stop it. Also, change the gear transmission into NEUTRAL. If the temperature doesn't come back to normal, turn off the car instantly and go for customer support nearby the Chrysler Pacifica Hybrid service station.

This warning sign will switch on when you adjust the desired speed to control your Chrysler Pacifica Hybrid.

The dashboard symbol will signify when the ESC system is turned on. The ESC Light in the device cluster will appear when the ignition is ON/RUN spot, or ESC is activated.

The dashboard symbol will signify when the ESC system is turned on. The ESC Light in the device cluster will appear when the ignition is ON/RUN spot, or ESC is activated.

This indicative infer when the oil temperature is high. If the flash triggers while driving, stop the car immediately. Keep waiting till the oil temperature returns to expected levels.

This dashboard sign shows that the high beam headlights are turned on. If the low beams headlight is on, lift the lever towards the Chrysler Pacifica Hybrid front side. To turn off the high beams, drag the lever to the rear side. Generally, It would be used in remote areas.

The dashboard indicator of Chrysler Pacifica Hybrid will light up when the ignition is ON before starting the engine. If the flash doesn't go on when switching from OFF to ON position. The minivan should be repaired if the light continuously stays on. When the engine is operating, the MIL illustrates a sudden loss of power or a severe catalytic converter defect.

This dashboard warning light flashes when the parking lights or headlights are switched on.

The Chrysler Pacific Hybrid includes a TPMS system that continuously controls tire pressure. If this indicator is flashing, it suggests that one or more car tires have low pressure. Analyze the pressure to detect a puncture; otherwise, the air pressure must be replenished.

This dashboard sign depicts that the front seat passenger is not fastening a safety belt. Must be sure that you fastened the seat belt while driving.

This sign indicates when the parking brake is applied. Still, if the light is turned on and noted that the car's brake is not clutched, it could imply an issue with the vehicle's brake system. It will remain on until the cause is corrected. If a brake fault is signified, a quick repair is essential.

Another dashboard warning light monitors when the battery is not charged correctly. If it goes on while the Chrysler Pacifica Hybrid is running, there may be any battery fault.

If this telltale will stay on, it indicates that the airbag system has failed. But an accident occurs, car airbags may not be deployed inaccurately. So we advise you to get a dealer appointment for servicing your Chrysler Pacifica Hybrid.

If this light flickers, you must investigate the minivan immediately. If the reason is not analyzed, the system may not operate normally and probably become the reason for an accident. It discloses a failure in Anti-Lock Brake System.